TM 9-2330-390-14&P
3-10.
CLEANING ENGINE AIR CLEANER ELEMENT (Con't).
Compressed air used for cleaning or drying purposes, or for clearing restrictions,
should never exceed 30 psi (207 kPa). Wear protective clothing (goggles/shield,
gloves, etc.) and use caution to avoid injury to personnel.
d.
Remove sand or dust from air cleaner element (2) by gently tapping. While rotating air cleaner element,
apply compressed air from the inside.
e.
If air cleaner element (2) is oily or coated with carbon dust, soak in a solution of water and dishwashing
compound (Item 7, Appendix F) for 15 minutes. Wash several times, rinse with fresh water, and allow to dry.
f.
Clean interior of body (1) as required.
g.
Install air cleaner element (2) in body (1).
h.
Install cover (3) over air cleaner element (2) with wingbolt (4). Tighten wingbolt finger-tight.
3-29/(3-30 Blank)
