TM 9-2330-390-14&P
2-26. OPERATION IN EXTREME HEAT.
a.
Refer to Chapter 3, Section I for proper lubrication during extreme heat conditions.
b.
Avoid parking dolly set in sunlight for long periods of time. Heat and sunlight shorten tire life.
c.
Shelter or cover dolly set with canvas, if available.
d.
Ensure that tires are Inflated to proper pressure (see paragraph 1-15).
2-27. OPERATION IN MUD.
a.
If one or more wheels sink into mud, it may be necessary to raise sunken wheel(s) and place planking or
matting under it.
b.
If tactical situation permits, immediately after operation in mud, thoroughly clean, inspect, and lubricate
(see Chapter 3, Section I).
c.
Have Unit Maintenance pack wheel bearings as required.
2-28. OPERATION IN SALTWATER AREAS.
Saltwater causes rapid rust and corrosion to develop. Clean, inspect, and lubricate as soon as possible
after operation In saltwater areas (see Chapter 3, Section I). Have Unit Maintenance pack wheel bearings
contaminated by saltwater as soon as possible.
Change 1 2-145
