TM 9-2330-390-1 4&P
2-11.
RAISING DOLLY SET WITH OR WITHOUT SHELTER AND COUPLING TO TOWING
VEHICLE.
· Ail personnel must use caution when standing near doily set, shelter (if present), and
towing vehicle during raising and coupling operations. Failure to follow this warning
may cause serious Injury or death to personnel.
· Use extreme caution when using ladder. Have an assistant hold ladder to ensure that
it Is stable. Failure to follow this warning may cause serious injury to personnel.
Ensure that all electrical and air connections are secure, and lines are not kinked or
dragging on the ground. Failure to follow this caution may result In damage to
equipment.
NOTE
· Procedures to raise doily set, with or without shelter, and couple to towing vehicle
are similar. Differences will be ldentified as they occur.
· If raising dolly set without shelter, perform steps a through c.
a.
Connect one end of each intradolly air hose (7) to service (blue) and emergency (red) gladhands (4 and
8) on front dolly pivoting tray (9). Coil extra length of intradolly air hoses between two hanger brackets (11). Connect
other end of each lntradolly air hose to service (blue) and emergency (red) gladhands on rear dolly pivoting tray (10).
NOTE
If raising a dolly set In preparation for tandem towing, skip step b.
b.
Connect intradolly cable (3) between 24-volt receptacle connector (6) at forward junction box (5) and
24-volt receptacle connector (2) at rear junction box (1). Coil extra length of intradolly cable between hanger brackets
(11).
c.
Secure intradolly air hoses (7) and intradolly cable (3) if present, with two stowage straps (12).
2-76
