TM 9-2330-379-14&P
REAR DOLLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY
WARNING
The rear adapter and the other portions of
the rear dolly must be firmly supported/
suspended before attempting to remove the
rear adapter.
NOTE
Because the connecting link, two upper arm
assemblies, and two lower arm assemblies
are attached to the rear adapter via
several pins, there are several ways to
continue disassembly depending upon what
you want to accomplish.
If you wish to completely disassemble the
rear dolly you can remove the major
components attached with pins at the
bottom of the adapter, one at a time, while
fully supporting the remaining components,
until all major components have been
removed.
If it is desired to remove only particular
components, the desired components can be
removed by first removing the pins that
connect the components together at the
bottom of the adapter, removing the
desired components, then placing a narrow
pipe or similar object through the other
components not being removed, to retain
proper positioning of the remaining
components.
1
Upper arm
Platform (2)
Remove four bolts (5) securing platform
assemblies
and four bolts
(2) to each upper arm assembly (3).
(3)
(5)
2
Rear
Platform (2),
a.
Remove nut (8) and bolt (7) that
adapter (1)
lower arm assem-
secure pin (6) attaching platform (2)
bly (4), pin
and lower arm assembly (4) to rear
(6), bolt (7),
adapter (1).
and nut (8)
b.
Perform same procedure on other side
of rear dolly.
5-10
