TM 9-2330-379-14&P
FRONT DOLLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY - CONTINUED
1
Front
Equipment
Ensure that front adapter (1) is firmly
adapter (1)
supports
supported by equipment supports.
2
Lower arm
Equipment
Ensure that both lower arm assemblies (3)
assemblies
supports
are firmly supported.
(3)
3
Connecting
Ensure that connecting link (4) is
link (4)
completely supported.
4
Upper arm
Connecting
Remove two bolts (5) that attach the left
assemblies
link (4) and
and right upper arm assemblies (2) to
(2)
four bolts (5)
connecting link (4).
NOTE
Because the connecting link, two upper arm
assemblies, and two lower arm assemblies
are attached to the front adapter via
several pins, there are several ways to
continue disassembly depending upon what
you want to accomplish.
If you wish to completely disassemble the
front dolly you can remove the major
components attached with pins at the
bottom of the adapter, one at a time, while
fully supporting the remaining components,
until all major components have been
removed.
If it is desired to remove only particular
components, the desired components can be
removed by first removing the pins that
connect the components together at the
bottom of the adapter, removing the
desired components, then placing a narrow
pipe or similar object through the other
components not being removed, to retain
proper positioning of the remaining com-
ponents.
5-3
