TM 9-2330-379-14&P
Section XII SUSPENSION SYSTEM MAINTENANCE
Page
Page
Air Mount Bumper .............................................
4-167
Shock Absorbers ...........................................
4-170
Air Spring Assembly ..........................................
4-167
Torsion Bars ..................................................
4-172
AIR SPRING ASSEMBLY
This task covers:
a.
Removal (page 4-166)
b.
Installation (page 4-167
INITIAL SETUP:
Tools
Equipment Conditions
General mechanics tool set
No special requirements.
1 1/2-ton floor type jack
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
NOTE
Dolly set should be connected together.
NOTE
Air spring assembly should be deflated prior to removing.
1
Frame
Jack (2), air
Raise upper arm assembly (5) so that
adapter (1)
spring assembly
base of air spring assembly (3) clears
(3), lower arm
the lower arm assembly (4).
assembly (4),
and upper arm
assembly (5)
2
Air spring
Threaded rods
Remove.
assembly (3)
(6), nuts (7),
to upper
and flat washers
arm assem-
(8)
bly (5)
3
Spring assembly (3)
Remove from between upper arm assembly
(5) and lower arm assembly (4).
4-167
