TM 9-2330-379-14&P
TORSION BAR
This task covers:
a.
Removal (page 4-172)
b.
Disassembly (page 4-173)
c.
Assembly (page 4-174)
d.
Installation (page 4-175)
INITIAL SETUP:
Tools
Equipment Conditions
General mechanics tool set
No special requirements
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
CAUTION
Care must be exercised when removing the
torsion bar because of the various stress
forces on the bar.
NOTE
Constant pressure must be maintained on the
torsion bar when uncoupling the torsion bar
from the lower arm assembly.
1
Lower arm
Torsion bar (2),
Release torsion bar (2) from lower arm
assembly (1)
pin (6) and
assembly (1) by removing cotter pin (7)
cotter pin (7)
and pin (6).
2
Torsion bar (2),
Loosen screws first and torsion bar (2)
torsion bar
from lower arm assembly (1) by removing
bracket (5), and
four screws (6) and top half of torsion
four screws (6)
bar bracket (5).
3
Torsion bar (2)
Lift and remove torsion bar (2) and
and lower half of
lower half of torsion bar bracket (5).
torsion bar
bracket (5)
4-172
