TM 9-2330-379-14&P
WEDGE ASSEMBLY - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSPECTION
5
Wedge
Clean wedge assembly thoroughly and
assembly (2)
inspect the items listed below. Replace
entire wedge assembly if any parts are
defective or worn excessively.
Angled faces of
a.
Check angled faces of wedge (3) to
wedge (3)
see that they are free of pits or
marks.
Roller retainer
b.
Inspect roller retainer cage (4) to
cage (4)
make sure it will contain rollers
properly.
Spring (5)
c.
Inspect the spring (5) for marks that
could cause breakage.
4-122
