TM 9-2330-379-14&P
AIR LINES AND FITTINGS - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL - CONTINUED
3
Front dolly
Attached air
Refer to the removal procedures for the
auxiliary
hoses and
front dolly auxiliary brake lever (page
brake lever
fittings
4-97) for procedures for removing air
(control
hoses and fittings attached to the front
valve) (3)
dolly auxiliary brake lever.
4
Rear dolly
Attached air
Refer to the removal procedures for the
auxiliary
hoses and
rear dolly auxiliary brake lever (page
brake lever
fittings
4-99) for procedures for removing air
(control
hoses and fittings attached to the rear
valve) (4)
dolly auxiliary brake lever.
5
Gladhands
Attached air
Refer to the removal procedures for the
(5)
hoses and
various dolly set gladhands (page 4-129)
fittings
for procedures for removing air hoses and
fittings attached to the gladhands.
6
Front dolly
Attached air
Refer to the removal procedures for the
air reser-
hoses and
front dolly air reservoir (page 4-138) for
voir (6)
fittings
procedures for removing air hoses and
fittings attached to the front dolly air
reservoir.
7
Rear dolly
Attached air
Refer to the removal procedures for the
air reser-
hoses and
two rear dolly air reservoirs (page 4-140)
voirs (7)
fittings
for procedures for removing air hoses an d
and (8)
fittings attached to the two rear dolly air
reservoirs.
8
Dolly set
Hose clamp (9),
a.
Remove various clamps (9), screws
frame
screws (10), and
(10), and fiat washers (11) securing
flat washers (11)
air hoses to frame and various dolly
set components.
b.
Remove air hoses and place in safe
area for stowage.
INSTALLATION
Use the above procedures in reverse for installation.
4-127