TM 9-2330-275-14&P
1.
2.
3.
4.
5.
6.
Section Il. MANUFACTURING INSTRUCTIONS (Con’t)
Table G-3. Spacer Length.
L (Length)
Part Number
in.
mm
11649042-1
2.75 ± 0.02
69.65 ± 0.51 mm
11649042-2
2.94 ± 0.02
74.66 ±0.51 mm
11649042-3
7.12 ± 0.02
I 160.65 ± 0.51 mm
11649042-4
5.12 ± 0.02
130.05 ± 0.51 mm
11649042-5
1.31 ± 0.02
33.27 ± 0.51 mm
Make from aluminum pipe, 6063-T6, P/N M25995B3FC020, 1.315 in. (33.40 mm) outside diameter
and 1.049 in. (26.64 mm) inside diameter in accordance with MIL-P-25995. Refer to Table G-3 for
length.
Remove burrs and sharp edges.
Clean and treat in accordance with MIL-C-5541 or anodize in accordance with MIL-A-8625.
Prime paint in accordance with TT-P-666 or MIL-P-8585.
Paint with semigloss olive drab enamel in accordance with TT-E-529. Use color number X24087 in
accordance with FED-STD-595.
Apply part number in accordance with MlL-STD-130.
Figure G-5. Spacer.
G - 6
