TM 9 - 2330 - 275 - 14&P
4-39. POWER CLUSTER REPLACEMENT (Con’t).
NOTE
Asssmbly at rear dolly has no spacer.
4.
Remove four screws (8) and Iockwashers (9) from bracket (11) and remove master cylinder(2), air cylinder
(12), bracket (11), and spacer (10), as an assembly, from dolly. Discard Iockwasher.
5 ,
If power cluster at front dolly was removed, remove air hose (7), elbow (14), and adapter(13)
(12).
from air cylinder
6.
If power cluster at rear dolly was removed, remove quickdisconnect fitting (5) from air cylinder (12).
7.
Remove two bolts (17), indicator (16), and three Iockwashers (15) from bracket (11), and separate master
cylinder (2) and air cylinder (12) from bracket (11). Discard Iockwashers.
b. INSTALLATION [
t
NOTE
1.
2.
3.
For the M832 (SN J089-001 thru 159 and J017-160thru 350), bracket is rotated
180 degrees.
Install air cylinder (12) and master cylinder (2) on bracket(11) with three new lockwashers (15), indictor,
and two bolts (17).
If assembly was removed from reardolly, apply antisezing taps to threads of quick disconnect fitting (5) and
install quick disconnect fiting on air cylinder (12).
If assembly was removed from front dolly, apply antiseizing tape to threads of adapter (13), elbow (14), and
air hose (7), and install adapter (13), elbow (14), and air hose (7) on air cylinder (12).
4-96
