TM 9-2330-275-14&P
4-38. WHEEL CYLINDER MAINTENANCE
This Task Cover:
a. Removal
c. Bleeding Brakes
b. Installation
Initial Set:
Equipment Conditions:
Materials/Parts
. Brakeshoes removed (para 4-37).
l Brake fluid (Item 5. Appendix E
• Rags (Item 11, Appendix E)
Tools/Test Equipment:
l Clear container
l Plastic tubing
. General mechanic's tool kit
. Two Iockwashers
• Common no.1 shop set
Personnel Required: Two
a.
REMOVAL I
NOTE
Use a suitablecontainerto catoh brake fluid. Make sure spills arecleaned up.
1.
Remove fluid passage bolt (1),two washers (9), and multiple connector (2) from rear of backing plate (4).
2.
Remove bleeder valve (3) from wheel cylinder (6).
3.
Remove two screws(8) and lockwashers(T), wheelcylinder(6), andshieid (5) frombackingplate(4). Discard
lockwashers.
1.
Install shield (5) and wheel cylinder (6) on backing plate (4),with two new lockwasher (7)and screws (8).
2.
Install bleeder valve (3).
4 - 92
