REPAIR FABRIC ASSEMBLIES - TM-10-8340-227-13P

REPAIR FRAME ASSEMBLY - Continued - TM-10-8340-227-13P_76

REPAIR FABRIC ASSEMBLIES - TM-10-8340-227-13P_78

TM-10-8340-227-13P Soldier Crew Tent Type 1 NSN: 8340-01-359-0084 Type II NSN: 8340-01-359-0084 Type II NSN: 8340-01-359-1481 Manual
Page Navigation
68

TM 10-8340-227-13&P 4-11. REPAIR FABRIC ASSEMBLIES. This task covers: Repair INITIAL SETUP Tools: Punch and Die, Grommet Inserting (Appendix B, Section III, Item 2) SCT Repair Kit (Appendix B, Section III, Item 1) Tentage Repair Kit (Appendix B, Section III, Item 3) Materials/Parts: Brush (Appendix E, Section II, Item 1) Denatured Alcohol (Appendix E, Section II, Item 4) Filter, Cartridge (Appendix E, Section II, Item 5) Gloves, Latex-Nitrile (Appendix E, Section II, Item 6) Goggles, Chemical Splash (Appendix E, Section II, Item 7) Respirator (Appendix E, Section II, Item 8) Seam Sealer (Appendix E, Section II, Item 10) Wiping Rags (Appendix E, Section II, Item 11) Equipment Condition: Although the fabric assemblies can be repaired during operational use of the tent when necessary, it is recommended that the fabric be repaired when the tent is not in use, since repairs are easier when the fabric assemblies are separated. The fabric assemblies should be clean and dry. Repair Fabric Assemblies a. Repair all rips, tears or holes up to a maximum of six inches by sewing or patching, using the tools and materials listed above. Follow the procedures in FM 10-16 to make these repairs. Turn in fabric assemblies to direct support maintenance for repair of holes 6" or larger or ripped seams. WARNING Seam sealer and solvent are extremely flammable and fumes toxic - contains isopropyl alcohol. Do not smoke or use seam sealer or solvent near open flame. Death or serious injury may result from explosion or fire. 4-9

Privacy Statement
Press Release
Contact