TM 10-8340-227-13&P4-10. REPAIR FRAME ASSEMBLY - Continued(1) RemoveWARNINGCable is under tension. Do not attempt to remove frame pole short without first removing framejoint sleeve.(a) Remove frame joint sleeve from frame pole short (1) (refer to para 3-6).(b) Insert pole and hook assembly (2) into frame pole short (3).WARNINGCable is under tension. Ensure poles are connected before proceeding.(c) Remove split ring (4) and frame pin (5) securing cable assembly (6).(d) Remove cable assembly (6) and cylindrical spring (7) from bottom of pole and hook assembly (2)(2) Install(a) Insert cylindrical spring (7) and cable assembly (6) through bottom of pole and hook assembly (2).(b) Align loop in cable assembly (6) with proper hole in frame pole short (3).(c) Insert frame pin (5) through frame pole short (3) and loop in cable assembly (6). Secure with splitring (4).(d) Install frame joint sleeve on frame pole short (1) (refer to para 3-6).4-8
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business