TM 10-8340-225-10
2-18.
STRIKING PROCEDURES-CONT.
e.
Collapsing the Frame Lengthwise.
(1)
On one side only, slide the locking collars off the hinges of the cross members and ridge pole (three on
each cross member and one on the ridge pole).
(2)
Collapse the three unlocked horizontal frame members by hinging the cross members downward and the
ridge pole member sideways. They only go in one direction.
CAUTION
When handling tent frame do not twist or turn. Damage to frame may
result.
WARNING
Whenever working near frame hinges, be careful to avoid pinching your
hands or fingers. Do not hold the hinges themselves.
(3)
Fasten the appropriate buckles around the collapsed end of the top corners of the frame and pull them
tight.
(4)
Insert the bottom corner feet over the center feet, connect the buckles and pull them tight.
(5)
Repeat above steps one through four for the other end of the frame.
2-30
