INSTALL DOUBLE BUMP-THROUGH DOORS IN VESTIBULE OR VESTIBULE ADAPTERINSTALL DOUBLE BUMP-THROUGH DOORS IN VESTIBULE OR VESTIBULE ADAPTER

INSTALL DOUBLE BUMP-THROUGH DOORS IN VESTIBULE OR VESTIBULE ADAPTERINSTALL DOUBLE BUMP-THROUGH DOORS IN VESTIBULE OR VESTIBULE ADAPTER (cont)

TM-10-8340-224-13 Tent Extendable Modular Personnel (Temper) Manual
Page Navigation
71

u. v. w. x. ARMY TM 10-8340-224-13 AIR FORCE TO 35E5-6–1 NAVY NAVFAC–P-337.A Secure vestibule fabric (3) to vestibule frame (4) with tie tapes. Install a 12–inch steel pin (14) in base plates of end vestibule frame (4) . Identify and install single ply floor (15) and secure with tie tapes (16) to vestibule frame (3) . Install insulated floor (17) on top of single ply floor (15) . Secure with tie tapes (18) . 2-20. INSTALL DOUBLE BUMP-THROUGH DOORS IN VESTIBULE OR VESTIBULE ADAPTER. If authorized, the bump-through doors may be installed in the vestibule doorway or vestibule adapter. Proceed as follows to erect doors: a. Stand the double bump-through door (1) up and lock the door in the closed position. b. Loosen the set screws (2) on top of doors. .--A 2-53

Privacy Statement
Press Release
Contact