TM 10-8340-205-13&P
Figure 2-10. Extending Tent Walls to Form Awnings.
(d) Drive pins and attach guy lines as shown in Figures 2-2 and 2-10.
NOTE
The slide fasteners on the side wall awnings at the front end of the stack section
can be unfastened, and the long guy lines from the 9-foot (2.745-m) front side
stack poles can go through the openings
(e) Lay the rolled screen wall in front of the two 9-foot (2.745-m) poles at the front of the service section.
(f) Unroll the screen wall around the tent as shown in Figure 2-10.
NOTE
Be sure that the peak of the screen wall is located at the center of the tent.
(g) Attach screen wall to snap fasteners located along the tent eave line (Figure 2-11).
2-14
