TM 10-7360-209-13&P
Lid Gasket
a.
Remove
Remove gasket from lid.
b.
Replace
Install gasket on lid.
Latch Assembly
a.
Remove
1.
Remove two screws.
2.
Remove latch assembly.
b.
Replace
1.
Align latch assembly with two holes in Dispenser, Liquid, Insulated.
2.
Install and tighten two screws.
Faucet assembly and spout assembly
a.
Removal
1.
Loosen wing nut (4) and remove faucet (8) from spout (1).
2. Loosen Cap (6) from top of faucet (8) and remove silicone rubber
seat cup (7).
3.
Remove “C” nut (5) and wing nut (4) from spout (1).
4.
Remove hex nut (3), spout (1) and “O” ring (2).
4-10
