TM 10-7360-209-13&P
o f f t
eight
b.
Removal
1.
Loosen the eight hex nuts from studs and remove.
2.
Remove eight lock washers from studs.
3.
Remove the Table Leg Assembly by lifting entire assembly
he studs.
c.
Replace
1. Align the eight holes on the table leg assembly on to the
studs on the bottom of the table.
2.
3.
4-11.
DISPENSER,
Vent Cap
Replace the eight lock washers on the studs.
Replace the eight hex nuts on the studs and tighten.
LIQUID, INSULATED
a.
Remove
Remove vent cap form Iid.
b.
Replace
Install vent cap on lid.
4-9