TM 10-7360-208-13&P
2-7.
OPERATING PROCEDURES (CONT).
g.
Griddle Assembly.
(1)
Refer to para 2-7d and prepare two M2 burner units (1). Raise heat guards (2) and carefully place M2
burner units in the double burner rack (3) under the griddle (4). Do not force.
(2)
Let griddle reach operating temperature before use.
WARNING
During operation check grease accumulation. Excessive grease
either on the griddle or in the container below the griddle poses
a fire hazard. A grease fire may cause injury to personnel and
equipment.
CAUTION
Do not use abrasives to clean griddle. Use of abrasives will
destroy anodized protective surfaces.
(3) After use, turn off the M2 burner units (1) and allow these, and the griddle assembly to cool down.
2-26
