TM 10-7360-208-13&P
2-6. ASSEMBLY AND PREPARATION FOR USE (CONT).
j. Mounted Can Opener, Work Table and Shelf.
(1) Pull out the leg assemblies (1) until the
linkage (2) snaps into place in the fully extended
position.
(2) Place the shelf (3) so that the end lips (4)
rest on the crossbars (5) connecting the legs (6) at
each end.
(3) Take the two work tables to their operating
locations as shown in (Figure 2-1).
(4) Mount the can openers (7) in the can opener
slot on the work tables.
2-16
