TM 10-7310-281-13&P
MODERN BURNER UNIT (MBU)
0005 00
OPERATION UNDER USUAL CONDITIONS
0005 00-7
Connect each branch (16) of the 4 branch cable to the power-in connector (17) of each MBU.
Slide the clips (15) left or right as needed to organize the cable along the front of the appliances to help
prevent the cable from extending into the work area.
With the power converter main power switch OFF, connect the Feedway Cable receptacle (18) located
just below the GFCI outlets (19) mounted to the side of the cooling cabinet to the designated power
source using the 50ft (110V AC) extension cord (20) provided.
Connecting Power Cables to MKT
Connecting Power Cables with 110V AC Power for systems other than MKT and KCLFF -(E).
With the power converter input switch (1) OFF, connect the power converter power cord (2) to the
designated power source using the 50ft (110V AC) extension cord (3) provided.
Connect the 25ft (24V DC) power cable extension (4) (if required) to the power converter (2).
Connect the 2 or 4 Branch cables (24V DC) (5) to the other end of the 25ft (24V DC) extension (4) (if
used).
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
