TM 10-5411-235-13
REPAIR OF SHELTER PANEL PUNCTURE - NO CORE DAMAGE
THIS WORK PACKAGE COVERS:
Repair
INITIAL SETUP:
Maintenance Level
Direct Support
Tools:
General Mechanics Tool Kit (WP 0042, Table 2, Item 1)
Riveting Tool (WP 0042, Table 2, Item 2)
Oscillating Sander ( WP 0042, Table 2, Item 7)
Drill (WP 0042, Table 2, Item 4)
Materials/Parts:
Alcohol, Isopropyl (WP 0044, Table 1, Item 7)
Polysulfide sealer (WP 0044, Table 1, Item 2)
Commercial Body Filler (WP 0044, Table 1, Item 8)
Cloth, cotton (WP 0044, Table 1, Item 3)
Dome Head Pop-Rivets (WP 0044, Table 1, Items 27 & 28)
Sandpaper (WP 0044, Table 1, Item 12)
Gloves, rubber (WP 0044, Table 1, Item 11)
Aluminum Patch (WP 0044, Table 1, Item 13)
REPAIR
1. Select an aluminum patch that overlaps the puncture or cut by one inch in all directions.
2. Roughen the skin surface with 80 grit abrasive paper.
WARNING
Alcohol solvents are flammable. Keep away from heat,
sparks, and open flame. Keep containers closed when
not in use. Use only in well ventilated areas. Avoid
prolonged breathing of vapors or repeated contact with
skin.
NOTE
Make sure that the area is completely clean. Do not
touch the area with hands or any item that may leave an
oily residue.
3. Wear rubber gloves and use a clean cloth with isopropyl alcohol to remove all dust and
residue.
0031 00-1
