TM 10-5411-235-13
ROLLER LATCH ASSEMBLY
THIS WORK PACKAGE COVERS:
Replace
INITIAL SETUP:
Maintenance Level:
Unit
Tools:
General Mechanics Tool Kit (WP 0042, Table 2, Item 1)
Materials/Parts:
Roller Latch Assembly
REPLACE
REMOVE
1. Remove four bolts (6), lockwashers (7), flat washers (8), roller latch door shim (9) and two roller
latch spacers (10).
2. Remove four bolts (12), lockwashers (13), flat washers (14), roller latch door shim (15) and two
roller latch spacers (16).
3. Remove four bolts (1), lockwashers (2), roller latch door shim (3) and two roller latch door
spacers (4).
4. Remove entire Roller Latch Assembly from door.
INSTALL
1. Locate entire Roller Latch Assembly to door.
NOTE
Do not tighten bolts until all shims are installed.
2. Secure handle three point roller latch (5) to door using four bolts (1), lockwashers (2), shim (3)
and two spacers (4).
3. Secure upper three point roller latch (17) to door using four bolts (12), lockwashers (13),
flatwashers (14), shim (15) and two spacers (16).
4. Secure lower three point roller latch assembly (11) to door using four bolts (6), lockwashers (7),
flat washers (8), shim (9) and two spacers (10).
5. Check door closure pressure in accordance with local Standard Operating Procedures (SOP).
0024 00-1
