TM 10-5411-235-13
DOOR BRACE ASSEMBLY
THIS WORK PACKAGE COVERS:
Replace
INITIAL SETUP:
Maintenance Level
Unit
Tools:
General Mechanics Tool Kit ( WP 0042, Table 2, Item 1)
Materials/Parts:
Door Brace Assembly
Cotter Pin (WP 0044, Table 1, Item 22)
Lockwasher
Lockwasher
REPLACE
REMOVE
ANGLE DOOR STOP (10)
1. Remove six screws (9) and shims (8).
LOWER DOOR BRACE ASSEMBLY (3)
1. Remove six bolts (6), flat washers (4), and lockwashers (5) from under Door Brace Assembly (7).
2. Remove one screw (1) and lockwasher (2).
INSTALL
LOWER DOOR BRACE ASSEMBLY
1. Locate Lower Door Brace Assembly (3).
2. Install one screw (1) and lockwasher (2).
3. Install six bolts (6), flat washers (4), and lockwashers (5).
ANGLE DOOR STOP
NOTE
Outside edge screws on Angle Door Stop are longer.
1. Locate angle door stop (10) on shelter.
2. Install six screws (9) and shim (8).
0023 00-1
