TM 10-5411-235-13
DOOR ASSEMBLY
THIS WORK PACKAGE COVERS:
Replace, Test, and Adjustment
INITIAL SETUP:
Maintenance Level
Personnel Required: (2)
Unit
Tools:
General Mechanics Tool Kit (WP 0042, Table 2, Item 1)
Materials/Parts:
Door Assembly
Lockwasher
Lockwasher
Cotter Pin (WP 0044, Table 1, Item 22)
Shim (WP 0044, Table 1, Item 23)
Sealer (WP 0044, Table 1, Item 19)
Equipment Condition:
Roller Latch Assembly removed (WP 0024)
REPLACE
WARNING
Door assembly weighs around 40 pounds. Use two personnel to
support door during removal or serious injury may result.
CAUTION
Door assembly weighs around 40 pounds. Use two personnel to
support door during removal to prevent damage to door or shelter.
REMOVE
1. At the shelter door (1), loosen strap (2) and remove ladder (3).
2. Open shelter door (1).
3. Remove chain and pin assembly (8).
4. From outside of door, remove sealant from around door hinges.
5. Loosen eight nuts (4) inside of door. With nuts still on the end of the bolts, tap nut lightly with
hammer to loosen bolt from sealant.
6. Remove nuts (4) and flatwashers (5) from bolts (7), push bolts through door. Retain nuts, bolts,
and flatwashers.
7. Remove and retain shims (6).
8. Remove the door (1).
0021 00-1
