SECTION II. EQUIPMENT DESCRIPTION AND DATA

SECTION I. GENERAL INFORMATION - TM-10-5411-224-14_10

TM-10-5411-224-14 Lightweight Multipurpose Shelters (LMS) Model No. S-78B/G Type I and Type III & 5411-01-357-3683 Manual
Page Navigation
2

TM 10-5411-224-14 1-7. SAFETY CARE AND HANDLING. Many adhesive, cleaning, and bonding agents are used during skin repair procedures of the shelter. The prolonged use of these materials without protection can cause skin irritation. Inhalation of the vapors can be toxic if inhaled in quantity. Refer to FM 21-11 for first aid information. 1-8. CORROSION PREVENTION AND CONTROL. Corrosion Prevention and Control (CPC) of Army material is a continuing concern. It is important that any corrosion problems with this item be reported so that the problem can be corrected and improvements can be made to prevent the problem in future items. While corrosion is typically associated with rusting of metals, it can also include deterioration of other materials , such as rubber and plastic. Unusual cracking, softening, swelling, or breaking of these materials may be a corrosion problem. If a corrosion problem is identified, it can be reported using Standard Form 368, Product Quality Deficiency Report. Use of keywords such as "corrosion", "rust", "deterioration", or "cracking" will ensure that the information is identified as a CPC problem. The form should be submitted to the address specified in the DA PAM 738-750. 1-9. GLOSSARY. There are no terms used in this manual which require a glossary. SECTION II. EQUIPMENT DESCRIPTION AND DATA 1-10. EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES. The LMS shelter is a lightweight transportable shelter used to house various types of equipment as specified by the user. The shelter is normally mounted on a HMMWV. The LMS uses a two-piece construction method and a honey-comb core. The shelter provides Radio Frequency/ Electromagnetic Interference RFI/EMI shielding to protect user installed electronic equipment . The shield is a continuous metallic surface which maintains continuity around joints, door openings, entry panels and other possible sources of emissions leakage. The LMS shelter is designed for outdoor use in all weather conditions. 1-11. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. Major shelter components are shown in figure 1-2. The ladder assembly is secured to the door during shelter transit and storage and is positioned on brackets below the door when the shelter is to be placed in operation. The drain plug provides an RFI/EMI seal for the floor drain during operation. The plug is loosened for air or rail transport. The step assemblies and handhold provide easy access by personnel to the roof of the shelter. Four lifting rings located at the top corners of the shelter provide attachment points for a sling assembly when the shelter is to be lifted and transported. The access tunnel is provided as a covered location for a power generating unit as specified by the user. 1-12. DIFFERENCES BETWEEN MODELS. The only difference between type I and type III of the LMS model S-788/G is that type III is provided with a tunnel. The shelters are capable of being transported by helicopter. 1-13. EQUIPMENT DATA. Type I Type III Height: 67 in. 67 in. Width: 84 in. 84 in. Length: 102 in. 102 in. Weight (wiih mounting kit): 615 15 lb. 650 15 lb. 1-2

Privacy Statement
Press Release
Contact