TM 1O-5411-201-14
T.O. 35E4-178-1
2-12. (cont)
i. Raise cam lock handles on corner posts and rotate as indicated to disengage hinged floor locks.
j. Carefully lower hinged floor to the extent of support cable travel (1 1/2 in. (3.8 cm) below level).
WARNING
The stop plate cable assembly is a spring powered mechanism. Personal injury or death
may result if the two quick release pins are not installed in the stop plates.
k. Install two quick release pins in stop plates on load balancers (inside shelter) to prevent return of support
cable.
l.
m.
n.
o.
p.
Remove two support braces from equipment container.
Raise hinged sidewall and hold in position.
Install the two support braces in brace cups on hinged floor and sidewall behind support cable.
Remove two leveling jacks from inside of left cargo door.
Position jacks at each corner of expanded side.
NOTE
Stencil on jack indicates handle rotation to raise or lower jack.
2-22
Change 1
