TM 10-5411-201-14
T.O. 35E4-178-1
4-29.
(cont)
5.
Using blind bolt removal tool kit, remove 112 rivets (24) and two
hinge edge members (25).
(Refer to paragraph 4-33)
6.
Using blind bolt removal tool kit, remove 112 rivets (26) and
support angle assembly (27).
(Refer to paragraph 4-33)
CLEANING, INSPECTION
1.
Clean panel and component surfaces.
2.
Inspect mounting surfaces for corrosion and damage.
3.
Inspect for and replace if necessary:
a.
Missing or damaged components
b.
Corrosion or paint damage.
R E P A I R
1.
Panel skin damage (Refer to paragraphs 4-32 through 4-43 )
2.
Corrosion or paint damage.
(Refer to paragraph 4-44)
ASSEMBLY
1.
Using installation tool, assemble support angle assembly (27) to
base frame (4) with 112 rivets.
(Refer to paragraph 4-33)
2.
Using installation tool, assemble two hinge edge members (25) to
base frame (4) with 112 rivets (24).
(Refer to paragraph 4-33)
3.
Position brackets (23) on base frame channel (4) and install bolts
(22), washers (21), lockwashers (20), and nuts (19).
4-149
