TM 10-5411-201-14
T.O. 35E4-178-1
4-27. (cont)
2.
Remove screws (1) securing two
corner enclosures (2) to sidewall
panel (6).
3.
Remove bolts (3), lockwashers (4), and washers (5) securing sidewall
panel (6) to fixed floor.
4.
Remove bolts (7), lockwashers (8), and washers (9) securing sidewall
panel (6) to fixed roof.
Methylethylketone is flammable and toxic and shall be
used in a well-ventilated area away from sparks or open
flame. Gloves should be worn when used.
5.
Apply solvent to sealed interface
areas of sidewall panel and mating
surfaces.
6.
Block or support sidewall panel from outside shelter and use putty
knife to break sealant.
7.
Push from inside shelter and remove sidewall panel.
Sidewall Closeout Panel
1.
Remove captive screw (1) and two washers (2) at each of four
locations on ECU intake and return closeout panels (3).
4-132
