CARGO DOOR END ENDWALL PANEL REPLACEMENT AND REPAIR (cont)

CARGO DOOR END ENDWALL PANEL REPLACEMENT AND REPAIR (cont) - TM-10-5411-201-14_210

CARGO DOOR END ENDWALL PANEL REPLACEMENT AND REPAIR (cont) - TM-10-5411-201-14_212

TM-10-5411-201-14 Shelter Tactical Expandable One-Sided NSN 5411-01-124-1377 60 AMP Model NSN 5411-01-295-3433 100 AMP Model Manual
Page Navigation
192

TM 10-5411-201-14 T.O. 35E4-178-1 4-26. (cont) 2. Position upper mobilizer fitting (3) and install lockwashers (2) and screws (l). 3. Position level (5) and install rivets (4). (Refer to paragraph 4-33) Bond seal (10) in place with adhesive. (Refer to paragraph 4-41) 4. INSTALLATION 1. Apply adhesive before positioning endwall panel. 2. From outside shelter, position fixed endwall on fixed floor and push inward until endwall is against corner posts mating surfaces. 3. Align fixed endwall mounting holes with mounting holes and inserts in corner posts, fixed roof, fixed floor, and endwall hinge. NOTE Align mounting holes at fixed endwall corners and install bolts. Check that remaining holes and inserts are aligned and free from obstructions. 4-129

Privacy Statement
Press Release
Contact