TM 10-5411-201-14
T.O. 35E4-178-1
4-19.
(cont)
10.
Install spring plunger (2) in handle yoke and secure with nut (1).
Adjust nut to control handle movement.
11.
Position basic jack on base (17) with spacers (16) and secure with
pin (15), washer (14), and new cotter pin (13).
12.
Install grease fitting (7) and lubricate jack with grease.
4-20.
HINGED ROOF PANEL SERVICE, REPLACEMENT, REPAIR, AND ALIGNMENT
This task covers:
a. Lubrication
e. Repair
b.
Removal
f.
Assembly
c.
Disassembly
g.
Installation
d.
Cleaning, Inspection
h.
Alignment
INITIAL SETUP
Special Tools
Equipment Condition
Hand blind riveter, Appendix B, Item 2
Hinged endwalls removed,
Standard Tools
paragraph 4-21
General mechanics tool kit
Hinged roof area ceiling
Personnel - 4
lights removed, paragraph
1 Electrician
3-5
Materials
Adhesive, Item 2, Appendix E
Adhesive, Item 3, Appendix E
Sealant, Item 18, Appendix E
Silicone Grease, Item 23, Appendix E
LUBRICATION
Lubricate rollers on hinged roof panel with a coat of silicone grease
annually.
4-81
