TM 10-5411-201-14
T.O. 35E4-178-1
4-19.
(cont)
NOTE
Do not remove lanyard unless pins or
cables are damaged.
5.
6.
7.
8.
9.
Remove screws (11) and spring
tension clip (12).
Remove cotter pin (13), washer
(14), pin (15), and spacers
(16) to remove base (17) from
basic jack.
Remove inside tube (18) and
jack screw (19) from outside
tube (20).
Remove bearing (21).
Drive pin (22) out through
access hole and remove jack
screw (19) from inside tube
(18)
10.
Remove O-rings (29) from handle
(5).
Jack Extension
11.
Remove quick-disconnect pins
(23) and remove inside tube
(24) from outside tube (25).
12.
Remove screw (27), washer
(28), and lanyard (26).
NOTE
Do not remove lanyards unless pins or cables are
damaged.
CLEANING, INSPECTION
1.
Clean jack assembly and component surfaces.
2.
Inspect mounting surfaces for corrosion and damage.
4-79
