TM 10-5411-200-14
T.O. 35E4-177-1
2-12.
(cont)
WARNING
Expandable section (hinged floor and hinged sidewall
together) weighs 700 pounds (318 kg). Do not stand
directly in front of hinged section.
i.
Raise cam lock handles on corner posts and rotate as indicated to
disengage hinged floor locks.
Carefully lower hinged floor to the extent of support cable travel
(1-1/2 in. (3.8 cm) below level).
W A R N I N G
The stop plate cable assembly is a spring powered
mechanism.
Personal injury or death may result if
two quick release pins are not installed in the
stop plates.
k.
Install. two quick release pins in stop plates on load balancers
(inside shelter) to prevent return of support cable.
l.
Remove two support braces from equipment container.
m.
Raise hinged sidewall and hold in position.
n.
Install the two support braces in brace cups on hinged floor and
sidewall behind support cable.
o.
Remove two leveling jacks from inside of left cargo door.
p.
Position jacks at each corner of expanded side.
2-22 CHANGE 2
