CONTAINER LIFT JACK ASSEMBLY SERVICE AND REPAIR

HINGED FLOOR PANEL REPLACEMENT AND REPAIR (cont) - TM-10-5411-200-14_201

CONTAINER LIFT JACK ASSEMBLY SERVICE AND REPAIR (cont) - TM-10-5411-200-14_203

TM-10-5411-200-14
Page Navigation
182

TM 10-5411-200-14 T.O. 35E4-177-1 4-24. CONTAINER LIFT JACK ASSEMBLY SERVICE AND REPAIR This task covers: a. Disassembly d. Lubrication b. Cleaning, Inspection e. Assembly c. Repair INITIAL SETUP Standard tools Materials General mechanics tool kit Grease, Item 12, Appendix E Grease gun DISASEMBLY 1. 2. 3. 4. 5. 6. 7. 8. 9. Remove nut (l), spring plunger (2), pin (3), and handle (4). Remove pin (4) and separate handle (5) from support (6). Remove two O-rings (30) from handle (5). Remove grease fitting (7). Remove rivet (8) to remove lanyard (9) and safety pin (10). NOTE Do not remove lanyard unless pins or cables are damaged. Remove screws (11), lockwashers (12), and spring tension clip (13). Remove cotter pin (14), washer (15), pin (16), and spacers (17) to remove base (18) from basic jack. Remove inside tube (19) and jack screw (20) from outside tube (21). Remove bearing (22). Drive pin (23) out through access hole and remove jack screw (20) from inside tube (19). 10. Remove screws (24), retainer (25), and rotating insert (26). 11. Remove screws (27), lockwashers (28), and handle (29). Remove O-rings (30). 4-117

Privacy Statement
Press Release
Contact