TM 10-5411-200-14
T.O. 35E4-177-1
4-23.
(cont)
1.
Remove screws (1) and washers (2) and remove cam strike (3).
2.
3.
4.
5.
6.
7.
8.
9.
Drill out blind rivets (4) and remove threshold (5).
(Refer to
paragraph 4-32)
Drill out blind rivets (6) and remove strike cup (7).
(Refer to
paragraph 4-32)
Peel off seal (8).
Drill out blind rivets (9) and remove grommets (10).
(Refer to
paragraph 4-32)
Drill out blind rivets (11) and remove closeout seal. (12).
(Refer
paragraph 4-32)
Remove screws (13) from cable guide bracket (14).
Drill out blind rivets (15) and remove brace cup (16).
(Refer to
paragraph 4-32)
Drill out blind rivets (17) and remove stop angle (18).
(Refer to
paragraph 4-32)
4-112
