TM 10-5411-200-14
T.O. 35E4-177-1
4-21. (CONT)
1.
Drill out rivets (1) and remove
bumper pad (2). (Refer to paragraph 4-32)
2. Remove rivets (3) and (4) and
remove latch (5) and latch pan (6).
(Refer to paragraph 4-32)
3.
4.
5.
6.
7.
8.
9.
Remove screws (7) and remove spacer
(8).
NOTE
Step 4 applies to left endwalls only.
Drill out rivets (9) and
remove retainer strips (1 O) and
(11 ). (Refer to paragraph 4-32)
Remove seal (12). (Refer to
paragraph 4-40)
Drill out rivets (13) and remove
retainer strip (14). (Refer to
paragraph 4-32)
Remove seal (15). (Refer to paragraph 4-40)
Remove velcro strap (16).
Drill out rivets (17) and remove retainer
strip (18). (Refer to paragraph 4-32)
CHANGE 5 4-93