TM 10-5411-200-14
T.O. 35E4-177-1
4-9.
(cont)
7.
8.
9.
10.
11.
12.
13.
Rotate screw on clamp (12) one-quarter turn, open clamp (12), and
remove electrical cord (9).
Drill out two rivets (11) and remove clamp (12) from exterior light
post (lo).
(Refer to paragraph 4-32)
Remove electrical cord (9) from exterior light post (10).
Separate liquid tight connector (13) and connector (14) from
electrical cord (9).
Remove three terminal lugs (15) from three wires in electrical cord
(9) .
Remove two wing nuts (16), washers (17), and bolts (18) from
exterior light post (10).
Drill out four rivets (19) and remove two cord stowage brackets (20)
from exterior light post (10).
(Refer to paragraph 4-32)
4-19
