TM 10-5410-229-13&P
SECTION I. DESCRIPTION AND USE OF OPERATORS CONTROLS AND
INDICATORS
2-1.GENERAL. The MCPS has been designed for use in forward combat areas and has relatively few moving parts.
Electrical controls are found on the light set as described in paragraph 2-2 below.
2-2.
OPERATORS CONTROLS AND INDICATORS. Refer to table 2-1.
Figure 2-1.
LUMINAIRE CONTROLS
Table 2-1. Luminaire Controls
Control or Indicator
Function
On/Off Switch (1)
Turns lamp in luminaire
on or off.
Fuse (2)
Protects light set from
overload and shorting.
Spare Fuse (3)
Provides for back-up fuse
in case of failure.
2-2