TM 10-5410-224-14
INTRODUCTION
Section 1.
GENERAL
1-1. Scope.
d. For further information refer to TM 38-750
the Army Maintenance Management System
This manual is for your use in operating and
(TAMMS).
maintaining the expandable shelter for shop,
portable, aircraft maintenance (SPAM) (fig. 1-1)
1-3. Destruction of Army Materiel to Prevent
herein referred to as the expandable shelter.
Enemy Use.
1-2. Maintenance Forms and Records.
For destruction procedures for army materiel
refer to TM 750-244-3.
Maintenance forms and records that you are
required to use are as follows:
1-4. Administrative Storage.
a. DA Form 2404 (Equipment Inspection and
For procedures, forms and records, and in-
Maintenance Worksheet).
spections required during administrative storage of
b. DA Form 2407 (Maintenance Request Used
this equipment, refer to TM 740-90-1.
for Requesting Support Maintenance).
c. DA Form 2407-1 (Continuation Sheet Used
for Requesting Support Maintenance).
Section Il. DESCRIPTION AND DATA
1-5. Description,
in figure 1-3 are hinged to the center structure
roof, and two foldout floor panels are hinged to the
a. The expandable shelter unfolds from a
center structure floor. Also, two foldout end walls
packaged center structure (stowage mode) to an
are hinged to the foldout floor panels, and four
expanded shelter (deployment mode) (fig. 1-1). The
swingout walls are hinged to the center structure
overall dimensions of the expandable shelter in
cargo and personnel end panels. In expanded form,
both the stowage mode and the deployed mode are
the shelter is supported by eight ratchet-handle
given in fig. 1-2, The components that form the
leveling jacks. The leveling jacks are stored inside
final expanded structure are hinged and folded into
the center structure, along with deployment tools
the center structure so that the unit may be ex-
and equipment.
panded without removing whatever payload might
be in the container. Two foldout roof panels shown
