TM 10-5410-223-14/1
washers (62) and remove the damper assembly (63).
remove the guides (40) and risers (41 ); then remove
(19) Remove nut (64) and screw (65) and
nuts (42), if damaged.
remove the counterweight (66).
(14) Remove cotter pins (43) and remove the
handle (44) and bars (45).
(20) Remove rivets (67) and remove the LH and
(15) Remove screws (46) and washers (47) and
RH hinges (68 and 69).
(21) Remove rivets (70) and remove the support
remove the lock assembly (48), plates (49 and 50),
plate (51), coupling (52) and plate (53), then remove
(71) from the plate (72).
(22) Remove screws (73) and remove the
nuts (54), if damaged.
(16) Remove rivets (55), screws (56) and
housing assembly (74) and gaskets (75, 76 and 77).
washers (57) and remove the handle (58).
(23) Remove rivets (78) and remove the hinges
(17) Remove the cover plate (59, fig. 6-5, sheet
(79) from the housing (80).
4 of 5),
(24) Remove the closeouts (81 and 82, fig. 6-5,
(18) Remove cotter pins (60), pins (61) and
sheet 5 of 5) from the raw door panels (83).
6-14
