TM 10-5410-223-14 /1
Figure 6-4. Access door assemblies, removal and installation (sheet 3 of 3 ).
(6) Remove inserts (18), if damaged.
b. Disassembly.
(1) Remove rivets (1, fig. 6-5, sheet 2 of 5) and
(7) Remove pin (19) and separate the half
hinges (20 and 21) and springs (22).
remove the strip (2) and blackout curtain (3).
(8) Remove screws (23) and remove the door
(2) Pull the hook fasteners (4 and 5) from the
stop (24).
door.
(9) Remove rivets (25) and remove the doubler
NOTE
(26).
Hook fasteners are secured to the doors with
adhesive.
(10) Remove rivets (27 and 30, fig. 6-5, sheet 3
of 5) and remove seal retaining strips (28 and 31) and
(3) Remove rivets (6) and remove the inner
seals (29 and 32).
frame (7) and pile fasteners (8 and 9).
(11) Remove rivets (33) and remove the plate
(4) Remove rivets (10) and remove the outer
assembly handle (34).
frame (11), windows (12), spacer (13) and closeouts
(12) Remove screws (35) and remove striker
(14).
(36) then remove nuts (37), if damaged.
(5) Remove screws (15) and rivets (16) and
(13) Remove screws (38) and washers (39) and
remove the hinge assembly (17).
6-13
