TM 10-5410-221-14/1
(2) Peel reinforcing tape (7) from door assembly (13)
is cut or otherwise damaged, apply patch to damaged
and end panel (12) as described below. Peel end panel
area.
(12) from door assembly.
(4) Disassemble window blackout curtains by cutting
(a) Carefully peel the cemented parts to separate,
stitches as described in (3) (a) and (b), and separating
keeping the cloth soaked with solvent as the parts are
parts as shown in figure 9-4.
d. Repair. Repair damage to air lock components
peeled apart.
(b) Examine the separated parts for damage and
as described in c. (3) (a) (b).
e. Assembly. Assemble end panel and door
repair damage by patching or replacement, before
recementing parts.
assembly using figure 9-3 as a guide and observing the
(3) Cut stitches and remove pile fabric fastener tape
following:
(8), and separating pin half of zipper (9) as described
(1) Install ground apron (11, fig. 9-3), tent pin patch
below.
assemblies (10), separating pin half of zipper (9), and
(a) Remove sewn fabric parts by carefully cutting
pile fabric fastener tape (8) on end panel (12) and secure
stitches securing parts with a seam ripper or other
by sewing as described below using size F-F olive green
sharpened tool. Remove cut stitches from fabric parts.
thread, and observing figure 9-5.
(b) Use extreme care in cutting stitches to
prevent cutting or other damage to fabric. If fabric
1. Fastener
3. Cord (12 in. (30 cm) long, O.D. color) (2)
2. Reinforcing-strip
4. Curtain body
Figure 9-4. Blackout Curtain, Disassembly (TS 012829)
9-5
