TM 9-2330-379-14&P
AFTER USE - CONTINUED
Coupling Front and Rear Dollies Together
1.
Remove the dolly caster assemblies from the front dolly.
2.
Line up front dolly adapter (1) with rear dolly adapter (2).
3.
Place mounting bolts (3) on top and bottom of adapters and secure adapters with nuts (4) and
safety pins (5), making sure nuts are tight.
NOTE
Tow bar and positioning casters should be used to move dollies into place as necessary.
4.
Turn all hydraulic pump release valves to the PUMP position.
5.
Pump up all hydraulic cylinders in unison until the mechanical struts for each are fully
extended straight out.
6.
Lock struts in position by screwing down the strut clamps.
7.
Turn the hydraulic pump release valves to the REL position. Then, tighten the valves finger
tight.
CAUTION
Air spring riding height should be checked before attempting to tow empty dolly sets.
8.
Check air spring riding height.
2-46