TM 10-5410-221-24
and bolt (12) and separate clamps (13) a remove from
pump inlet tube assembly (52) from tee (53) and pump
vacuum supply tube (14) a humidifier overboard drain
inlet. Remove potting compound from around pump inlet
(54). Disconnect vacuum supply tube (14) from tee (9) a
drain tube assembly (52) where it enters shelter and
remove potting compound from around vacuum supply
remove pump inlet drain tube assembly (52) from shelter
line where it enters shelter. Remove vacuum supply
water box.
tube (14).
(10) Disconnect humidifier overboard drain
(3) Remove nuts (15, 16), packing (17) elbow
tube assembly (54) from tee (23) and remove potting
(18), and disconnect cold water supply tube assembly
compound from around tube where it enters shelter.
(20) from coupling assemble (19). Remove coupling
Remove the shelter water box.
assembly (19). Disconnect supply tube (20) and cold
(11) Disconnect sump vent tube assembly
water in tube assembly (22) from tee (21). Remove cold
(55) from union (56) and tee (23). Remove
water supply tube assembly (20) and (21) from water
union (56) and packing (57) from drain sump.
box.
(12) Remove bolts (58), washers (59) and
(4) Disconnect cold water inlet tube assembly
remove clamps (60). Disconnect vacuum tube assembly
(22) from tee (23) and remove potting compound from
(61) from vacuum nipple and cap assembly (72) and
around cold water inlet tube (22) where it enters shelter
remove tube assembly (61) from shelter water tunnel.
Note. Access to shelter water tunnel is made
and remove cold water inlet tube (22) from water box.
Remove cap assemblies (24) from tee (23).
by jacking up, shelter and removing the water tunnel'
(5) Remove nut (25), and packing (26) from
elbow (27). Disconnect hot water supply tube (28) from
(13) Remove nut (62), washer (63) and bolt
elbow (27) and tee (29).Remove elbow (27) and hot
(64), remove clamp (65) from hot water tube assembly
water supply tube (28) from water box. Disconnect hot
(68). Remove bolt (66) and bracket (67) and disconnect
water inlet tube assembly (30) from tee (29) a remove
hot water tube assembly (68) from hot and cold water
potting compound from
around water inlet tube
coupling (76).
assembly (30) where it enter shelter and remove from
(14) Disconnect cold water tube assembly
water box.
(69) from hot and cold water coupling (76) and
(6) Loosen nuts (31, 33) from drain coupling
remove from shelter water tunnel.
(32) and remove packing (34) a drain coupling (32) from
(15) Remove clamp (70) from drain tube
mounting bracket and drain manifold (41).
assembly (71) and disconnect drain tube assembly (71)
(7) Remove union (35), and pack: (36) from
from drain coupling (78) and remove tube assembly from
drain manifold (41). Loosen (38) and remove union (39)
shelter water tunnel.
and packing (37) and packing (40) from lower drain
(16) Remove nuts (73, 74) from vacuum nipple
manifold (41) and upper drain manifold (46).
and cap assembly (72) and remove from shelter water
(8) Remove union (42) and pack (43) from
outlet box.
upper drain manifold (46) by r connecting drain tube
(17) Remove nuts (75) from hot and cold water
assembly (50). Remove union (44) and packing (45)
coupling assembly (76) and remove from shelter water
from up drain manifold (46). Separate washer drain
outlet box.
coupling (47) from union (44). Remove p (49) and
(18) Remove nut (77) and remove drain
packing (48).
coupling assembly (78) and shims (79) from water outlet
(9) Disconnect drain tube assembly (4 from
box.
drain tube assembly (51, Fig 9-1) from check valve
c. Repair and Overhaul. Repair or over-haul the
and pump. Disconnect
shelter supply and tube assemblies