TM 9-4931-374-13&P
CONVERSION TABLE
IN.
CM
NOTES
0.37
0.94
1.
All dimensions shown are in inches. A dimension with a two-digit
1.00
2.540
decimal has a tolerance of 0.03 in.(0.08 cm) and a three-digit
21.120.06
53.640.15
decimal has a tolerance of 0.010 in. (0.025 cm). All angles have
49.000.06
124.46015
a tolerance of 5 degrees.
1.75
4.45
0.406
1.03
2.
Fabricate from steel structural angle, NSN 9520-00-277-5987.
0.312
0.79
46.940.06
119.230.15
3.
Break all sharp edges and deburr all holes.
0.31
0.79
0.12
0.30
WARNING
0.85
2.16
Use only type 1.1.1 trichloroethane solvent. Never use
0.188
0.48
solvent unless ventilation is provided. Breathing solvent
vapors will cause unconsciousness, prolonged skin contact
with solvent will cause irritation, and taking solvent
internally will cause vomiting.
4.
Degrease with type 1.1.1 trichloroethane (item 20, app D).
5.
Apply one coat primer coating (item 15, app D), followed by two
coats semigloss OD enamel (item 8, app D).
6.
Mark with black stencil marking ink (item 13, app D) as fo llows.
P/N 12011665
E-21
