TM 9-4931-374-13&P
CONVERSION TABLE
IN.
CM
NOTES
16.375
41.592
1.
All dimensions shown are in inches. A dimension with a two-digit
0.500
1.27
decimal has a tolerance of +0.03 in. (0.08 cm) and a three-digit
1.000
2.54
decimal has a tolerance of +0.015 in. (+0.38 cm).
0.250
0.635
72.630.06
184.480.15
2.
Fabricate from steel structural angle, NSN 9520-00-277-4912.
18.13 46.05
0.88
2.24
3.
Break all sharp edges and deburr all holes.
2.56
6.50
16.062
40.797
WARNING
29.562
75.087
Use only type 1.1.1 trichloroethane solvent. Never use
43.062
109.377
solvent unless ventilation is provided. Breathing solvent
56.562
143.667
vapors will cause unconsciousness, prolonged skin contact
70.062
77.957
with solvent will cause irritation, and taking solvent
16.380
41.605
internally will cause vomiting.
0.4380.010
1.1130.025
2.00
5.08
4.
Degrease with type 1.1.1 trichloroethane (item 20, app D).
0.188
0.478
1.00
2.54
5.
Apply one coat primer coating (item 15, app D), followed by two
coats semigloss OD enamel (item 8, app D).
6.
Mark with black stencil marking ink (item 13, app D) as follows.
P/N 12011662
E-17
