TM 9-4931-374-13&P
SERVICE
WARNING
Do not remove or install the
grounding rod when shop set
is energized.
2
SCREW (2).
Remove
from
plug
connector (3).
3
TERMINAL LUG (4).
a. Loosen screw (5) and remove grounding
rod wire (6).
1
CABLE ADAPTER ASSEMBLY (1).
b. Clean all parts with abrasive cloth (item
Remove dirt with a cloth (item 5, app D).
4, app D).
c. Reinstall grounding rod wire (6) and
tighten screw (5).
REMOVAL
WARNING
De-energize shop set by
placing circuit breaker on
4
TERMINAL LUG (4) AND SCREW (2).
power
distribution
panel
connected to power source in
a.
Assemble.
OFF
position
and
then
disconnect 120/ 208V cable
b.
Reinstall on plug connector (3).
assembly from shelter.
3-289
