TM 9-4931-374-13&P
REASSEMBLY
1
ANGLE (1). Position long leg against long
leg of front lefthand angle (2) as illustrated.
NOTE
When bolted together, the bottom of
angle (5) should extend below the
11 EIGHT ANGLES (23).
bottom of rear left-hand angle (6) as
illustrated.
a. Straighten if bent.
2
TWO BOLTS (3) AND TWO NUTS (4).
b. Repair cracks by welding.
Install so that center line of two bolts (3) is
approximately 0.875 in. (2.22 cm) from
c. If not repairable, replace with a new
bottom of angle (1).
fabricated part (fig. 24, app E).
3
ANGLE (5). Position long leg against long
leg of rear left-hand angle (6) as illustrated.
NOTE
When bolted together, the bottom
of angle (1) should extend below
the bottom of front left-hand angle
(2) as illustrated.
4
TWO BOLTS (7) AND TWO NUTS (8).
Install so that center line of two bolts (7) is
approximately 0.875 in. (2.22 cm) from
bottom of angle (5) as illustrated.
5
ANGLE (9).
Position long leg
against long legs of front lefthand
angle (2) and rear left-hand angle
(6) as illustrated.
3-257
