TM 9-4931-374-13&P
MODIFICATION
SWITCHBOX (1).
a. On the back, drill two 0.25in. (0.64-cm)
holes (2), using the mounting bracket (3)
as a template.
NOTE
Modification of the switchbox
b. On the back, drill one 0.53in. (1.35-cm)
may be necessary when the
hole (4), using the mounting bracket (3)
switchbox is replaced by a
as a template.
new one.
c. On the side, drill one 0.19in. (0.48-cm)
hole (5) as illustrated.
REASSEMBLY/INSTALLATION
NOTE
For clarity, existing wires not
mentioned in the text have
been removed.
2
BLUE WIRE NO. 4 (4), BLUE WIRE NO.
5 (5), BLUE WIRE NO. 6 (6), AND
GREEN WIRE NO. 11 (7). Push into
switchbox (8).
3
CONNECTOR (9). Install in switchbox (8).
1
MOUNTING BRACKET (1). Install two flat
washers (2) and two hex head capscrews
(3).
3-199
